Installation Guide

3
If the accessory is installed in the
shower, seal the wall around the an-
chors with waterproof sealant.
Failure to seal the wall can lead to
possible water damage.
Installation 06092xx0, 06091xx0,
06090xx0, 06093xx0, 06094xx0,
06095xx0, 06097xx0 / 06098xx0,
04063xx0
Using the mounting piece as a template, mark the posi-
tions of the screw holes.
Drill the holes with a 6mm bit.
Do not press the mounting piece into
the accessory until the mounting piece is
screwed firmly to the wall!
Install the anchors.
Install the mounting piece with the notch at the
bottom.