Installation Guide

4
To remove the accessory from the wall
06097 Towel bar only: Use the allen wrench to
loosen the set screw (1). Pull the accessory away from
the wall (2).
Other accessories and towel bars: Press the acces-
sory firmly over the mounting piece.
The retaining pin in the accessory will snap into place,
holding the accessory firmly on the mounting piece.
All other accessories and towel bars: Push a small tool,
such as an allen wrench, through the hole in the bottom ot the
escutcheon.
Push the tool firmly against the retaining pin (1). At the same
time, pull out on the holder (2).
06097 Towel bar only: Press the end pieces
over the mounting pieces (1). Use the enclosed allen
wrench to tighten the set screws (2)