Installation Guide

2
Technical Information
Recommended water pressure 15 - 75 PSI
Max. water pressure 145 PSI
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 176°F*
Flow rate 1.5 GPM
Hole size in mounting surface 1⅜"
Max. depth of mounting surface 1⅝"
English
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
Tools Required / Outiles Utiles
/ Herramientas Útiles
10010xx1
14¼"
max 1⅝"
1⅞"
1¼"
4¼"
2⅞"
⅜"
9⅛"
9"
Petroleum-based plumbers putty can damage the
surface of some sinks. Please consult the manufac-
turer of the sink regarding compatible sealants.
9 mm
16 mm