Installation Guide
2
English
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
Technical Information
Recommended water pressure 15 - 75 PSI
Max. water pressure 145 PSI
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 176°F*
Flow rate - lavatory 1.5 GPM
Flow rate - bidet 2.2 GPM
Hole size in mounting surface 1⅜"
Max. depth of mounting surface 1⅝"
*Please know and follow all applicable local plumbing codes when
setting the temperature on the water heater.
Tools Required / Outiles Utiles /
Herramientas Útiles
9 mm
16 mm