Installation Guide

6
English
Installation
Install the drain pull rod (not included with
#16506xx1, 16806xx1).
Place the faucet and the sealing washer on the
mounting surface.
Connect the supply hoses to the stops.
Use two wrenches, as shown, to pre-
vent the hoses from twisting.
A twisted hose may become loos-
ened from the faucet, causing a leak.
Turn on the water and check all connections for leaks.
Install the fiber washer, metal washer and mounting
nut.
Tighten the collar nut by hand.
Tighten the tensioning screws.
1
2
3