Installation Instructions / Warranty Montreux 16502XX1 16506XX1 Montreux 16505XX1 Montreux 16520XX1
Montreux Single-hole Lavatory Faucet 16502XX1 Single hole Lavatory Faucet without Drain 16506XX1 Single-hole Small Lavatory Faucet 16505XX1 Single-hole Bidet Faucet 16520XX1 16502XX1 / 16506XX1 16505XX1 Technical Data Maximum Flow Rate 2.2 gpm Maximum incoming water pressure 145 psi Recommended incoming water pressure 14.5 psi - 72 psi Hot water temperature: max.
Replacement Parts 2 1 9 12 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 4 5 6 handle screw cover, cold/ hot spout large model aerator cpl. shut off unit pull rod fixation set connection hose spout small model spout for bidet aerator cpl.
Caution: Do not bend or twist the supply hoses! Installation Flush the hot and cold supplies thoroughly before installing this faucet. Damage to the cartridges due to debris is not covered by the Hansgrohe limited lifetime warranty. Place the faucet and the sealing washer in position on the basin / bidet. Slip the slide washer, metal washer and collar nut over the threaded base and tighten the collar nut by hand.
Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. Wrap the threads with TeflonTM thread tape and replace. plunger height adjuster Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. flange From under the sink, install the black mack gasket, white friction ring , and retainer nut to the flange. Do not tighten the nut against the bottom of the sink at this time.
Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • • • • To remove lime scale, use only products made specifically for that purpose.
THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. C.
www.hansgrohe-USA.com US - Installation Instructions • Part No. 90581421 • revised 12/2006 Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel.
