Installation Sheet

2
Technical Information
Flow rate 2.5 GPM
English
Installation Considerations
• For best results, Hansgrohe recommends
that this unit be installed by a licensed,
professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This showerhead is for use with automatic
compensating valves rated at 8.3 L/min (2.2
GPM) or less.
• To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 120°F. In Massachusetts,
the maximum output temperature can be no
higher than 112° F.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
28427xx1
28428xx1
28421xx1