Installation Instructions / Warranty Raindance C 28445XX1
Raindance C Bodyspray 28445XX1 Technical Specification Max. flow rate @ 44 psi 1.2 gpm Requires ½" NPT brass male nipple installation without spacer recessed ⁵⁄₁₆" behind surface of finished wall Installation Considerations • For best results, Hansgrohe recommends that this unit be installed by a licensed, professional plumber. • Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation.
Suggested Installations Cleaning The bodyspray uses the Quick Clean™ cleaning system. Clear scale deposits from the spray channels by turning the water on lightly and rubbing across the channels using fingers or a sponge.
Rough-in For each bodyspray, install a properly anchored dropear ell at least 2" behnd the surface of the finished wall. Install a test nipple in each ell. When the finished wall is complete, mark the test nipple at the wall surface. Remove the test nipple, and measure it to the mark.
Subtract ⁵⁄₁₆" from this measurement. This is the length of the brass nipple required. Installation Wrap the threads on both ends of the nipple with Teflon tape. Install the bodyspray on the nipple. Install the sealing ring on the back of the bodyspray. Coat the back of the sealing ring with a small amount of white plumbers' grease.
Install the nipple/bodyspray assembly. Tighten the nipple/bodyspray assembly using an 8 mm Allen wrench. Install the cover. 8 mm Seal the wall at the grout joints using waterproof sealant.
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
own the product and the home in which the product is originally installed. If you purchased the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B.
