Installation Instructions / Warranty Metris 31060XX1 31020XX1 31261XX1
Metris Single Control Lavatory Mixer 31060XX1 Tall Lavatory Mixer 31020XX1 Single Control Bidet Mixer 31261XX1 31060XX1 31020XX1 31261XX1 Technical Specification Recommended incoming water pressure 22 - 72 PSI Recommended incoming hot water temperature 120o - 140oF* Hole size in mounting surface 1 3/8” Maximum mounting surface thickness 1 5/8” Flow rate 2.2 gpm max.
Installation Place the faucet and the sealing ring on the countertop. From below, install the fiber washer, friction washer and mounting nut. Tighten the mounting nut and the tensioning screws. sealing ring fiber washer friction washer mounting nut tensioning screws Attach the hoses to the supply stops with 3/8” compression fittings (not included). Use two wrenches, as shown, to prevent the hoses from twisting or from becoming loose. Install the pop-up drain (see page 4).
Install the Pop-up Drain plunger Remove the plunger assembly. height adjuster Unscrew the drain outlet flange from the tee. flange Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. From under the sink, install the black mack gasket, white friction ring and retainer nut to the flange. Do not tighten the nut against the bottom of the sink at this time.
Reset the High Temperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use the included 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions. Remove the handle and put it in a safe place. Remove the decorative nut cover and put it in a safe place. Remove the handle screw from the stem of the cartridge. Remove the high temperature limit stop.
Replacement Parts 1 1.1 1 3 1.1 2 3 4 4 9 2 10 5 11 9 10 12 5 11 12 6 6 13 14 8 1 1.
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B.
