Installation Sheet

5
English Français Español
Place the faucet and sealing ring
on the mounting surface.
Install the plastic washer, friction
washer, metal washer, and mount-
ing nut.
If the mounting surface is thicker
than 1¾", or if there is insufficient
space, omit the plastic washer.
Placez l'anneau d'étanchéite et le
robinet sur la surface de montage.
Installez la rondelle de plastique,
la rondelle en fibre, la rondelle de
friction, et l'écrou de montage.
Si l'épaisseur du comptoir dépasse
1¾ po, ou si l'espace disponible
est insuffisant, omettez la rondelle
de plastique.
Coloque el oro de sellado y
el grifo sobre la superficie de
montaje.
Instale la arandela plástica, la
arandela de fibra, la arandela de
fricción y la tuerca de fijación.
Si el espesor de la mesada es
superior a 1¾ pulg. o si no hay
suficiente espacio, puede omitirse
la arandela plástica.
Tighten the mounting nut.
Tighten the screws.
Serrez l'écrou de montage et les
vis de serrage.
Apriete la tuerca de fijación y los
tornillos.
Apriete los tornillos tensores con
un destornillador.
Installation / Installation / Instalación
max. 1⅜" (35 mm)
max. 2⅜" (60 mm)
1a
1b
2
2.2 ft-lb
3 Nm