Installation Guide

5
English Français Español
Installation / Installation / Instalación
Place the faucet and sealing ring
on the mounting surface.
Install the plastic washer, friction
washer, metal washer, and mount-
ing nut.
If the mounting surface is thicker
than 1¾" (45 mm), or if there is
insufficient space, omit the plastic
washer.
Tighten the mounting nut.
Tighten the screws.
Placez l'anneau d'étanchéite et le
robinet sur la surface de montage.
Installez la rondelle de plastique,
la rondelle en fibre, la rondelle de
friction, et l'écrou de montage.
Si l'épaisseur du comptoir dépasse
1¾ po (45 mm), ou si l'espace
disponible est insuffisant, omettez
la rondelle de plastique.
Serrez l'écrou de montage.
Serrez les vis de pression à l’aide
d’un tournevis.
Coloque el oro de sellado y
el grifo sobre la superficie de
montaje.
Instale la arandela plástica, la
arandela de fibra, la arandela de
fricción y la tuerca de fijación.
Si el espesor de la mesada es
superior a 1¾ pulg.(45 mm) o si
no hay suficiente espacio, puede
omitirse la arandela plástica.
Apriete la tuerca de fijación y los
tornillos.
Apriete los tornillos tensores con
un destornillador.
2.2 ft-lb
(3 Nm)
max. 1¾"
(45 mm)
max. 2¾"
( 70 mm)
1b1a 2