Installation Guide

10
English
Place a dab of waterproof sealant at each grout joint.
Lubricate the adapter stems with a small amount of
white plumber's grease (1).
Install the handle adapters and screws (). Tighten
the screws using a  mm Allen wrench.
Install the volume control handle ().
Tighten the screw using a  mm Allen wrench.
Install the thermostatic mixer handle so that the safety
stop override button is at the 1:00 position (4).
Tighten the handle screw using a small slot-head
screwdriver.
Maintenance
Inspect the check valves yearly. Replace the check
valves when necessary.
If the water ow diminishes over time, clean the lters
on the thermostatic cartridge.
To prolong the life of the thermostatic cartridge,
regularly run it through its complete range of tempera-
tures.
1.
2.
3.
4.