Installation Guide

English
10
27437XX1 Installation
Rough-in: install a ½" NPT female tting, recessed
⅜" behind the surface of the nished wall.
Position the shower arm against the wall over the
tting.
Make sure that it is level.
Mark the positions of the screw holes.
Drill the screw holes using a  mm bit (1).
Install the anchors (2).
Seal the wall around the anchors
using waterproof sealant (3).
Failure to seal the wall may lead
to water damage.
Wrap the threads on the nipple using Teon tape.
Install the nipple.
6 mm
1.
2.
3.
15 mm