Product Manual

Hanshow ESL Controller HS_C09978 Product Manual
16 Hanshow Copyright Reserved ©
Hanshow Technology Co., Ltd.
Each configuration item is illustrated as shown in Table 4-4.
Table 4-4 Configuration items description
No.
Configuration item
Description
1
AUTO search
⚫ When set to OFF, you need to set the related ESL-
Working parameters manually.
⚫ When set to ON, the AP will automatically search
and connect to ESL-Working address in local area
network (LAN).
2
IPv6
⚫ Disable represents ESL-Working address can be
configured as IPv4 format address (It is
configurable when AUTO search is off). And an
error will be reported if the configuration format is
incorrect.
⚫ Enable represents ESL-Working address can be
configured as IPv6 format address (It is
configurable when AUTO search is off). And an
error will be reported if the configuration format is
incorrect.
3
ESL-Working address
The IPv4 or DNS in ESL-Working is configurable when
AUTO search is OFF.
4
Port number
Port number of ESL-Working:
⚫ When AUTO search is set to ON, it presents the
target ESL-Working address searched by the AP.
⚫ When AUTO search is set to OFF, it presents the
target ESL-Working address accessed by the AP.
5
SSL
Whether to use SSL to connect to ESL-Working
securely.
6
SSL MUTUAL AUTH
Whether to verify the ESL-Working certificate. This
feature is valid only when SSL is enabled.
Note:
➢ After the ESL-Working domain name address is set, you need to check if DNS
server in Network setting is configured correctly.
➢ If SSL is enabled, check if the port number is correct. Generally, the port number
is different when SSL is enable or disable.
➢ The modified ESL-Working information will take effect about 30s later, no need
to reboot AP.
Notice: You need to configure ESL-Working address manually when ESL controller
and ESL-Working are used in different network.