User's Manual

Option
Basic
54
Connection to Signal Source
1. Use 220 V or 110 V. (Free Voltage)
2. Connect monitor and Signal Source via Signal cable
3. Power on the monitor and computer.
4. Connection is finished.
Basic
General
For Macintosh
Adapter for Macintosh (Optional)
Refer to the table on the rear side of
the optional Macintosh adapter and
adjust DIP switch by the resolution.
T he range of control Angle
Power Adapter Form
Power Stand Form
Option
Forward 4
Default
Backward 31
Forward 4
Default
Backward 31
Port For 12V DC Cable From adapter or Stand.
Port For Signal Cable From Signal Source.
Port For AC Power Cable
< Power source connection >
< SIgnal cable connection>