User's Manual

1110
Horizontal Position
Adjusting OSD
Brightness
Contrast
MENU
1. Press the Menu button.
2. Use to move Brightness ICON.
3. Use SELECT button to select it.
4. Use to adjust the brightness.
5. Press SELECT button to exit.
6. Press MENU button to finish adjusting OSD.
SELECT
MENU SELECT
MENU SELECT
1. Press the Menu button.
2. Use
to move Contrast ICON.
3. Use SELECT button to select it.
4. Use
to adjust the contrast.
5. Press SELECT button to exit.
6. Press MENU button to finish adjusting OSD.
1. Press the Menu button.
2. Use
to move H-Position ICON.
3. Use SELECT button to select it.
4. Use
to adjust display left or right.
5. Press SELECT button to exit.
6. Press MENU button to finish adjusting OSD.
No image is displayed with Green blinking.
Monitor is in power saving mode.
Use mouse or keyboard to release power saving mode.
No image is displayed without LED on.
Power cable plug must be pulled out.
Check the power plug on monitor and on the wall.
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds the
maximum frequency of the monitor. Readjust resolution and frequency in
accordance with the monitor capacity. (Refer to Standard Signal Table)
Power Management Feature
When not in use for a long time, the monitor
automatically reduces its power consumption, meeting power saving
standards of EPA and NUTEK.
The monitor is equipped with a power saving circuit that
confirms to the world-standard Display Power Manager Signalling
(DPMS) mode of Video Electronics Standard Association (VESA).
The power management feature requires that the video card of the
computer should support DPMS function.
Status LED Sign Power Consumption
Normal Green ON Normal Power
DPMS mode Green Blinking
( 2 second interval )
5 W or Below