User's Manual

1716
Standard Signal Table
Pin assignment table D-Sub
Mini 15pin connector
VGA (720 X 400)
VGA (640 X 480)
VGA (640 X 480)
SVGA (800 X 600)
XGA (1024 X 768)
XGA (1024 X 768)
MAC (640 X 480)
MAC (832 X 624)
31.469
31.469
37.500
46.875
48.363
60.023
35.000
49.726
70.087
59.940
75.000
75.000
60.004
75.029
66.667
74.551
28.322
25.175
31.500
49.500
65.000
78.750
30.240
57.284
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
15
11 15
6
10
15pin D-Sub
Pin No. Assignment Pin No. Assignment
1 Red Video 9 5V Input
2 Green Video 10 Ground
3 Blue Video 11 Ground
4 N.C 12 SDA
5 Ground 13 H.Sync
6 Red Video Ground 14 V.Sync
7 Green Video Ground 15 SCL
8 Blue Video Ground
1. Press the Menu button.
2. Use
to move the Auto-config ICON.
3. Press SELECT button to see S/W revision date.
4. Press SELECT button to exit.
5. Press MENU button to finish adjusting OSD.
You can know a display information
(Horizontal, Vertical Frequency)
1. Press the Menu button.
2. Use
to move the Auto-config ICON.
3. Press SELECT button to select it.
( After auto configuration OSD disappear.)
In most case, Auto-Config adjusts display
appropriately. Use PH or adjust CLK
in accordance with graphic card to fine tune
the display.
MENU SELECT
MENU
MENU SELECT
1. Press the Menu button.
2. Use to move the Reset ICON.
3. Press SELECT button to select it.
4. Press MENU button to finish adjusting OSD.
(By selecting Reset ICON, you can initialize OSD menu.)
Auto-ConfigAuto-Config
Auto-ConfigInformation
Auto-Config
Menu Reset