7" TFT-LCD Color Monitor 17" VOL Printed on the recyclable paper www.hansolel.co.kr Printed in Korea Part No. 942217020001-01 Hansol Electronics Inc.
INFORMATION TO USER : This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Parts Good Posture Guide Parts Place the monitor to face the user and then adjust the monitor angle. Take a break (for about 10 minutes) at every hour during the work with monitor. Refer to the following figure to take the correct posture. about 50cm Look down the monitor below the horizon. Adjust the monitor to prevent reflection. LCD Monitor Relax shoulders and arms, and sit back on the chair. Adjust the monitor stand to acquire required angle.
Connection to Computer Basic Connection 12V DC connection terminal Computer cable For PC 1. Connect the adapter to "12V DC" input terminal. 2. Connect the computer cable to PC1 and DVI For Macintosh 3. Connect video (V1) connection cable or SVHS (V2) connection cable to DVD, VCR or camcorder. 4. Connect audio output (computer, DVD, VCR or camcorder) to Audio In (L), Audio In (R) or Audio In (Stereo). 5. Connect external audio system to Audio Out (Line). 6.
How to Adjust Monitor Angle How to Default Stand Installing Monitor Driver Run (Click) Install at CD-ROM driver and select the product model to set the optimum display in Window 95 or 98. Use the Driver CD provided. Download the latest driver from home page of Hansol Electronics Inc. (http://www.hansolel.co.kr). Automatic Installation 1. Insert the CD in the CD-ROM driver. 2. "Installation Manager" window appears. (Or, double-click Install.exe in the CD-ROM driver folder using search function.) 3.
Power Management Feature Click 'Advanced..'. Click 'Next>'. Click 'Monitor'. Click 'Display a list of all...'. Click 'Next>'. Click 'Have Disk..'. When not in use for a long period of time, the monitor automatically reduces its power consumption, meeting power saving standards of EPA and NUTEK. The monitor is equipped with a power saving circuit that conforms to the world-standard Display Power Manager Signalling (DPMS) mode of Video Electronics Standard Association (VESA).
