User's Manual

3130
Troubleshooting
Check the power connection.
(Refer to page 4)
Power LED is off.
No picture.
Check the signal cable between monitor
and computer. (Refer to page 4)
Perform AUTO ADJUSTMENT.
Check the computer connection cable.
(Refer to page 4)
Check if computer power is on.
Message, "CABLE
DISCONNETED."
is displayed on the
screen.
Screen looks to be run
down.
Perform FREQUENCY ADJUSTMENT and
Adjust PHASE.
Switch off/on the monitor.
Remove accessories (Video extension
cable and others) and switch on.
Screen is not clear.
Check the resolution and frequency of
computer and video card, and set up the
again in reference to the current monitor
mode and standard signal mode table.
Display is unstable and
trembling.
Type Amorphous active matrix super TFT LCD
Screen Size 17" (Diagonal)
Maximum Resolution A nalog : 1280 X 1024@75 Hz , DVI: 1280 * 1024@60Hz
Pixel Range 0.264 mm X 0.264 mm
Maximum Colors 16.7 M
Contrast Rate 200 : 1
Visual Angle 80° / 80° / 80° / 80° (Left / Right / Up / Down)
Response Speed 60 ms
Brightness 200 cd/m
2
Horizontal Frequency 80 kHz (Max.)
Vertical Frequency 75 Hz (Min.)
Video Signal Analog RGB (0.714 Vpp)
Synchronous Signal Mode H, V Separate TTL Sync, SOG, COMPOSITE
Maximum 47 W
Power Saving Mode Under 5 W
Front Part MUTE, SELECT, AUTO/EXIT, MENU,CH,
VOL SWITCH
Input : 85/265V (50~60 Hz),
Output : 12V, 4.5A, 54W
TV NTSC
Audio 3 Watt Speaker X 2 (Max.)
Video CVBS, S-VHS
Wall Mount VESA Standard
Safety Standard UL, CE, CB, TUV
EMI FCC-B
Low Radiation MPR-II
Size and Weight 435 X 448 X 197 / 6.0 Kg
Specification
LCD
Panel
Synchro
nization
Model (B17BF)
Video
Input
Power Consumption
Control key
Multi-
Media
Safety
Standard
& EMI
Dimension
Power Adapter
Adjust COLOR at User Mode in OSD Color
Menu.
Color is irregular.