User's Manual

1312
Clock Phase
User Color
1. Press the Menu button.
2. Use to move Color ICON.
3. Use SELECT button into the submenu.
1. Use
to move Red, Green, Blue ICON.
2. Use SELECT button to select color what
you want.
3. Use to increase or decrease each color.
4. Use SELECT button to return previously state.
5. Press the Menu button to exit.
1. Use
to select the Mode 1,Mode 2,Mode 3.
2. Press the Menu button to exit.
Model 1 : Maximum state of red,green,blue
Model 2 : Bluish white Model 3 : Reddish white
MENU
MENU SELECT
MENU
SELECT
Color
Preset Color
Clock Phase
1. Press the Menu button.
2. Use to move V-Position ICON.
3. Use SELECT button to select it.
4. Use to adjust display upward or downward.
5. Use SELECT button to return previously state.
1. Press the Menu button.
2. Use
to move Clock Phase ICON.
3. Use SELECT button to select it.
4. Use
to correct fine trembling or Video noise.
5. Use SELECT button to return previously state.
1. Press the Menu button.
2. Use
to move Clock ICON.
3. Use SELECT button to select it.
4. If Auto-config function fails to remove Video noise,
Use
or
to remove vertical noise.
( Adjusting clock phase is required after the
adjustment of clock.)
5. Use SELECT button to return previously state.
MENU SELECT
MENU SELECT
MENU SELECT
Vertical Position
Clock
Clock Phase
According to the characteristic of video card,
control range can be changed.