User Manual

13
CHANGING THE REMOTE’S BATTERY
The remote control for your speaker uses two AAA
type batteries. Access the battery compartment by
using a Phillips screwdriver to remove the screw
located on the bottom of the remote.
AirPlay iTunes DLNA
Digital or
Analog Bluetooth
USB
(Apple Only)
Speaker Input
Wireless/
Ethernet
Wireless/
Ethernet
Wireless/
Ethernet
Auxiliary Bluetooth USB
Front LED Color
Purple Purple Purple Green Blue White
Standby
√ √ √ √ √ √
Mute
√ √ √ √ √ √
Volume –/+
√ √ √* √* √* √
Previous Track/
Next Track
√ √ √** √
Play/Pause
√ √ √** √
Shuffle
√ √ √** √
Repeat
√ √ √** √
Bass Mode:
Normal
√ √ √ √ √ √
Bass Mode:
Bass +
√ √ √ √ √ √
Input: Wireless/
Ethernet
√ √ √ √ √ √
Input: Auxiliary
√ √ √ √ √ √
Input: Bluetooth
√ √ √ √ √ √
Input: USB
√ √ √ √ √ √
*Devices connected via auxiliary and Bluetooth will
often have their own volume control which is separate
from the speaker’s volume. If you are connecting a
device which allows you to adjust its volume separately,
we recommend that the volume on the device not be
set to maximum. When set to its maximum setting, the
amplifier in the external device is likely to introduce
elevated levels of distortion into the audio signal which,
in turn, will be further amplified by the speaker. Find
a volume between 50-–75% of the device’s maximum
volume and use your speaker’s volume control to adjust
the final playback volume.
** This feature is not be compatible with all DLNA devices.
Depending on the input selected on your speaker, the remote will control functions differently.
Caution! Danger of explosion
if battery is incorrectly replaced.
Replace only with the same or
equivalent type.
control functIons By InPut