User's Manual

22 Dynaudio
Interruptions, clicking noises, or other audible interference when playing
music is usually not caused by the radio transmission in the Xeo system.
Often other external causes influence the transmission quality.
Below are a few tips for improving transmission quality:
Position all radio transmitters and receivers away from each other. 1.
WLAN devices, radio receivers, and radio systems may influence
each other if they are too close together. Test out various locations for
each device.
Switch off the automatic search function in WLAN devices. WLAN 2.
devices and other radio systems permanently scan for available
frequencies, thus constantly sending signals that could disrupt other
radio systems. This automatic search function can usually be switched
off.
Always avoid walls if possible. Xeo technology radio signals can, of 3.
course, transmit through walls. However, walls may consist of very
different materials, such as wood fiberboard, stone, or even steel.
The walls may also contain complex cable installations for electrics,
phones, TVs, and radios, as well as water pipes and air shafts.
These can divert radio signals. This is why you should test different
locations for the transmitter and favor the most direct radio path to the
loudspeaker.
Do not operate any powerful electrical devices near the transmitter. 4.
Some electrical devices generate strong electromagnetic fields that
could disrupt radio systems.
You can ask your Dynaudio Xeo distributor for assistance at any time or
contact the Dynaudio helpline at [e-mail].
Malfunctions