Install Instructions For: WLLTR1p (ALL TX transmitter snd WLL RX 1p receivership, ELL-TR-1p W LL-TX] Install Instructions UNE UNESCO ls 68 1. Remove unit from box. 2. Determine location for placement of W LL-TX1. The W LL-TX1 may be installed in an equipment rack (half rack adapter required) or on a shelf, 3. Connect desired Input source to rear panel. You may use balanced (1/4” TRS) connectors, unbalanced mini or USB.
ELL-TR-1p install Instructions For: WALL TR-1p (MLLE transmitter snd W LL-RX 1p receivership. WLLRX1p Install Instructions LINEN TOWLINE 1. Remove unit from box. 2. Determine location for placement of ELL-BX1p. The ELL-RX1p may be installed in an equipment rack (half rack adapter required) of on a shelf. The antennas may be remotes using a wife antenna cable (not included; available through third party vendors). 3.
W LL-TR1 Install Instructions For: p TRAWL-1p (WELL TXT transmitter snd ELL-RX1p patresfamilias.
WL L-TR Install Instructions For: P WLLTR1p (WLLTX? transmitter and W LL-RX p receivership. IC Notice This device complies with industry Canada license exempt RSS standard(s), Operation Is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present apparel est conform aux CNR industrious Canada applicable aux apparels radio exempts de license.
