User's Manual

USER’S MANUAL
SB-300
To prevent damage or injury, be sure to read and understand these User’s Manual before using your IGO AUDIO
SOUND BASE SYSTEM
Please keep these instructions handy for future reference.
SOUND BASE SYSTEM
USER’S MANUAL
SB-300
To prevent damage or injury, be sure to read and understand these User’s Manual before using
Please keep these instructions handy for future reference.
SOUND BASE SYSTEM
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat resisters, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
For customers in the United States
Important Safety Instructions
THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003. CET APPAREIL
NUMÉRIQUE DE LA CLASSE B EST CONFORME
À LA NORME NMB-003 DU CANADA.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS;
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
FCC Information for use
The following FCC statement applies only to the version of this
model manufactured for sale in the U.S.A. Other versions may
not comply with FCC technical regulation.
CAUTION
You are cautioned that any changes or modifications not
expressly
approved in this manual could void your authority
to operate this equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Change the direction or location of the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
WARNING : SHOCK HAZARD - DO NOT OPEN
AVIS : RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with
general household waste. For proper treatment, recovery
and recycling of old products and used batteries, please take
them to applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC and
2006/66/EC.
By disposing of these products and batteries correctly, you
will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from inappropriate
waste handling.
For more information about collection and recycling of old
products and batteries, please contact your local municipal-
ity, your waste disposal service or the point of sale where
you purchased the items.
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Note for the battery symbol:
This symbol might be used in combination with a chemical
symbol. In this case it complies with the requirement set by
the Directive for the chemical involved.
Important precautions are provided on the product and in
these operating instructions to prevent potential personal
injury to users and other people as well as damage to
property, and to ensure the safe and proper use of the
product.
Understand the indications, marks and symbols fully before
reading the rest of the instructions. Observe the precautions.
Explanation of Indications
*
1: Serious injury refers to loss of sight, injuries, burns (high-and
low-temperature), electric shock, broken bones and poisoning,
etc. that cause after-effects or require hospitalization or
prolonged outpatient treatment.
*
2: Minor injury refers to injuries, burns and electric shock that
require no hospitalization or prolonged outpatient treatment.
*
3: Damage to property refers to extended damage to houses,
buildings, furniture, livestock, pets and others.
Explanation of Symbols
For customers in Europe
Information for Users on Collection and Disposal of
Old Equipment and used Batteries
Getting Started
Supplied Accessories
Getting Started
Supplied Accessories
Safety Precautions
Remote control (IRT-S100)
AAA R03 batteries
Pin Cable
Optical Cable
User’s Manual
The following accessories are supplied with your IGO
AUDIO SOUND BASE SYSTEM. Please make sure that
these accessories are included in the package.
If you wish to use a pin cable or an optical cable other
than those supplied, purchase a commercially-available
cable suitable for the location, jack type and usage
environment of the unit.
Accessory Quantity
MeaningIndication
1
2
1
1
1
Indicates improper handling or operation
could result in death or serious injury*
1
.
Indicates improper handling or operation
could result in minor injury*
2
or damage*
3
to property.
MeaningSymbol
Indicates prohibition
(an action that is not allowed).
What is prohibited will be described in or
near the symbol in either text or picture
form.
Indicates an instruction that must be
followed (a compulsory action).
Detailed instructions will be described in
or near the symbol in either text or picture
form.
Indicates disconnection.
If the unit emits smoke or an unusual smell, disconnect
the power plug from the wall outlet immediately.
Using the unit under such conditions may
result in fire or electric shock.
Make sure that the unit no longer emits the
smoke and then contact your dealer.
If the unit produces no sound, disconnect
the power plug from the wall outlet immediately.
Using the unit under such a condition may
result in fire.
Contact your dealer for inspection.
If water or other foreign objects enter the unit, disconnect
the power plug from the wall outlet immediately.
Using the unit under such conditions may result
in fire or electric shock.
Contact your dealer for inspection.
If the cabinet is damaged, disconnect the power plug
from the wall outlet immediately.
Using the unit under such a condition may result
in fire or electric shock.
Handling the unit with damaged cabinet may
cause injury.
Contact your dealer for inspection or repair.
If the power cord or plug is damaged or becomes hot,
press the POWER button on the unit to turn it off.
Make sure that the power plug is cooled down and
then disconnect from the wall outlet.
Using the unit under such conditions may result
in fire or electric shock.
If the power cord or plug is damaged, contact
your dealer for replacement.
On abnormal operation and breakdown
I
nstall this unit where the power plug is easily
accessible in case of unforeseen problems or
breakdown or when you are not going to use
the unit for a long time.
Do not install this unit in a place subject to
water splashes such as the bathroom or
outdoors. This may cause fire or electric
shock.
Do not install this unit in an uneven location such
as an inclined surface.
The TV may fall and cause injury.
Install the unit on a level, stable surface.
Do not install this unit in a location subject
to vibration.
The unit may move or fall, resulting in injury.
Fully insert the power plug into a wall outlet.
Improper plug connections may cause the
unit to overheat and result in fire.
Avoid using a damaged power plug or a
loose wall outlet.
Do not place any objects or pets on the unit.
Metals, liquids, cosmetics and pets may cause fire
or electric shock if they enter the unit.
A heavy object placed on the unit may cause
injury if it falls.
If the installed TV is wider than this unit, be careful
not to allow any protruding portion of the TV to
come into contact with other objects.
The TV may fall or be damaged, resulting in injury.
A heavy object placed on the unit may cause
injury if it falls.
On installation
Do no install this unit in a place subject to humidity,
oil mist or high levels of dust.
Installing the unit near a humidifier or cooking
stove or in a dusty place may cause fire or
electric shock.
If no measure is taken to prevent the TV from
falling or toppling, there may be a high risk of
injury.
Do not block the ventilation holes.
Blocked ventilation holes may cause heat build-up and
result in fire.
·
The gap created around the amplifier is there to dissipate
its heat emissions. Do not place objects on the amplifier
or block the gap.
·
Do not push the unit against the wall. (Allow a gap of
approximately 4 inches between the unit and the wall.)
·
Do not push the unit into a place with poor
ventilation, such as a closet.
·
Do not place the unit with its front side
facing up, on its side or upside down.
Do not place any equipment exceeding the specified
maximum weight on the top, shelf or bottom board
of the unit.
Prolonged use of the unit with overweight objects
placed on it may cause injury or damage to the unit.
·
The weight limits for the objects to be placed on
each board
·
Do not place any objects other than a TV on
the top board.
Do not repair, modify or disassemble the unit.
High-voltage components inside the unit may
cause electric shock or fire.
Contact your dealer for internal inspection,
adjustment or repair.
Do not:
·
damage, modify (e.g. use an extension), heat (place
close to any heating appliance) the power cord or
plug;
·
pull, pinch or place heavy objects on the
power cord or plug; or
·
forcedly bend, twist or bundle the power
cord or plug.
Doing so may cause fire or electric shock.
Do not put foreign objects into the unit.
If metals or flammable objects such as papers
enter the unit from the ventilation hole, fire or
electric shock may result.
Do not touch the power cord of the unit or the
cables/cords of the components connected to
this unit during a lightning storm.
Doing so may cause electric shock.
On operation
When installing a TV:
·
Take measures to prevent falling.
Failure to observe this caution may cause the
TV to fall, resulting in injury or damage.
Be extra careful with children.
Do not exceed the maximum rated output power
when using a wall outlet or wiring device.
Avoid sharing a single outlet with an
unreasonable number of other devices.
Doing so may cause fire or electric shock.
Be careful that some parts of this unit may become hot
during use.
If you move the unit to a remote place (e.g. moving house)
cover it with an object such as a blanket to avoid damage.
Do not subject the unit to strong impact or vibration.
Do not spray volatile solvents such as insecticides.
Do not allow rubber or plastic/vinyl products to come into
prolonged contact with the unit. This may cause deterioration
or damage to the surface finishing.
Avoid placing magnetic cards such as ATM cards or video
tapes near the unit. Data or information stored inside may
be lost due to magnetism from the unit.
External input images or sound may be slightly delayed
causing discomfort to users;
when enjoying Karaoke using a Karaoke equipment
connected to the unit; or
when listening to the sound from a DVD or video directly
connected to the unit.
On operation
Disconnect the power plug from the wall outlet before
cleaning the unit.
Failure to observe this caution may cause electric shock.
Do not use benzene or alcohol.
·
Do not use any volatile solvents such as benzene or
alcohol. Use of such substances may cause the cabinet
to deteriorate or damage the surface finishing.
Disconnect the power plug from the wall outlet before
cleaning the unit.
Failure to observe this caution may cause electric shock.
Cleaning the cabinet and control panel.
·
Remove the dirt and dust accumulated on the cabinet
and then lightly wipe with a commercially-available
cleaning cloth or soft cloth. Wiping or rubbing the
cabinet or control panel with a dirty cloth or an abrasive
cloth may damage or scratch the cabinet surface.
·
When using a chemical cleaning cloth, follow the
instructions on the package.
On cleaning
On operation
FORMOSA PROSONIC INDUSTRIES BERHAD shall not
be liable for any damages arising out of or in connection
with a natural disaster such as an earthquake or lightning,
fire, act of any third party, other accidents, intentional or
negligent act of customer, misuse and/or use of this
product under other abnormal conditions.
FORMOSA PROSONIC INDUSTRIES BERHAD shall not
be liable for any incidental damages arising out of or in
connection with the use or unavailability of this product
(including damages to business interests, business
interruption and loss of viewing fees).
FORMOSA PROSONIC INDUSTRIES BERHAD shall not
be liable for any damages arising out of or in connection
with non-observance of the contents of these Operating
Instructions.
FORMOSA PROSONIC INDUSTRIES BERHAD shall not
be liable for compensation for and/or incidental damages
arising out of or in connection with any data, including
videos, pictures and sound, that failed to be recorded
correctly in the recording device connected to this unit, or
that were altered or lost.
FORMOSA PROSONIC INDUSTRIES BERHAD shall not
be liable for any damages arising out of or in connection
with malfunctions, defects or improper operations
(including breakdown of the recording device connected
to the unit and alteration or loss of recorded data)
occurred by adding other equipment connected to the
unit.
The settings stored in the unit may be altered or lost due
to malfunction or noise including static electricity.
FORMOSA PROSONIC INDUSTRIES BERHAD shall not
be liable for such an incidence.
Disclaimer
Dispose of this product following the local guidelines or
regulations for its disposal. Contact your local government
for more detailed information on disposal.
On disposal
If you are not going to use the unit for a long time (e.g. if
you are travelling) be sure to disconnect the power plug
from the wall outlet for safety.
If the power plug is not disconnected, fire may result in
the event of breakdown.
The unit is not completely disconnected from the power
source even if the TV monitor is turned off by pressing the
POWER button on the TV or remote control.
To completely disconnect this unit from the
power source, disconnect the power plug
from the wall outlet.
Do not pull the power cord to disconnect the power plug.
Pulling the power cord to disconnect the power plug from
the wall outlet may cause damage to the power
cord or plug, resulting in fire or electrical shock.
Grasp the power plug to disconnect it.
Avoid plugging or unplugging the power plug
with wet hands.
Doing so may cause electric shock.
Do not hang or climb on this unit or TV;
and do not use this unit as a step ladder.
Doing so may damage the unit or TV or cause
it to fall or topple, resulting in injury.
Be extra careful with children.
Disconnect and inspect the power plug occasionally.
Clean the dirt and dust accumulated on the blades and
the surface on which the blades are installed.
Failure to observe this warning may cause the
insulation to deteriorate, resulting in fire.
On cleaning
Do not install this unit in a place subject to high
temperature.
Installing the unit in a place subject to high
temperature, such as a location near a heater
may cause fire.
It may also deform or damage the cabinet,
resulting in electric shock.
On installation
To move or carry this unit:
·
When moving the unit, disconnect the unit’s power
plug, and any cables and wires connected to the unit
and topple-prevention device
.
Moving the unit without disconnecting these components
may cause fire or electric shock from a damaged power
cord or injury due the TV toppling from the top of the unit.
·
Handle with care to avoid impact.
Failure to observe this caution could result in damage
to the unit and injury.
·
Remove TV from unit before moving.
TV could topple and cause serious injury
or damage.
Avoid prolonged listening to the audio at high volume
levels.
Listening to sound at such a high volume that it
irritates ears may damage your hearing.
Do not allow rubber or plastic/vinyl products to
come into prolonged contact with the unit.
This may cause deterioration or damage to the
surface finishing.
Do not place objects that are easily influenced by
magnetism, such as clocks, on this unit.
This may cause these objects to stop working.
Do not place hot objects such as a heated pan or
kettle on the unit.
The top surface may break and cause injury
or damage to the unit.
Batteries used for the remote control:
·
Do not use any batteries other than those specified.
·
Follow the polarity markings inside the compartment.
·
Do not charge, heat, disassemble or short-circuit the
batteries.
·
Do not expose the batteries to excessive heat such
as fire or direct sunlight.
·
Do not leave expired or drained batteries inside the
remote control.
·
Do not use different types of batteries or a new
battery with an old one at the same time.
Failure to observe these cautions may result in burns or
injury due to battery leakage or explosion.
Leaked battery fluid may harm your eyes or skin. If it gets
in contact with your eyes or skin, flush the affected area
with clean water and seek medical attention immediately.
If battery fluid comes in contact with clothing, flush
the affected area with clean water immediately.
If battery fluid has spilled on the apparatus,
wipe it off avoiding direct contact.
Notes and Precautions on use
Front view
Control panel
About this Unit
Control panel (see below)
Front speaker (right)
Center speaker
• Functioning when surround mode is ON.
Front speaker (left)
TV > DVD > AUDIO 1> AUDIO 2 (Bluetooth)
POWER
Press to turn the power ON and OFF.
INPUT selector
Each time you press the button,
the input source changes as follows:
VOLUME +/–
Press to adjust the volume level.
POWER indicator
Display panel
Rear view
Remote control
Information display
Displays the information on the status.
The information display will disappear if you do
not press any operation button within five seconds.
Power cord
When connecting external equipment such as a TV or BD/DVD player,
connect the power cord to the wall outlet only after the necessary
connections have been completed.
Amplifier connections
Optical digital audio input jacks
“TV” is only for connection to the
optical digital output jack on the TV.
• Use these jacks to connect external
equipment with an optical digital audio
output jack.
Analog audio input jacks
Use these jacks to connect
external equipment with an
analog audio output jack.
Audio 2 is purposely used
for Bluetooth, Please do
not remove the caps
Buttons on the remote control and their key functions are
as described below (some buttons may have different
functions from ordinary operations).
Signal transmitter
To operate the unit, point it at the
remote sensor on the unit.
POWER
Press to switch
“Power ON” and “Standby”.
MUTING
Press to mute the sound temporarily.
Press again to restore the sound.
INPUT SELECTOR
Press to select the input source.
SURROUND MODE
Press to turn the
surround mode ON and OFF.
VOLUME +/–
Press to adjust the volume level.
BASS
Press to switch the BASS BOOST
setting
Battery compartment cover
Remove this cover to insert
batteries.
Front view
Rear view
Website : http://www.igoaudio.com/
Printed in Malaysia
650-0SB300-00
(Open) size:750 x 315mm / (Close) size: 150 x 158mm / 11.11.13 / 19.11.13 / 20.11.13 / 21.11.13
Sound Base SB-300
Sound Base SB-300
Remote sensor
Input indicator
Indicates the selected input.
Sound Base SB-300
Instruction

Summary of content (2 pages)