User Manual

0
1060/1200/1600/1600H
horizontal axis (X) and CH2 in the vertical axis (Y)
Figure 2-25 X-Y display format
The following modes or functions will not work in X-Y format.
■
Automatic Measurements
■
Cursor Measurements
■
REF and MATH Operations
■
Horizontal Position
■
Trigger Controls
Set Trigger System
The trigger determines when the ll starts to acquire data and display a
waveform. When a trigger is set up properly, it can convert unstable displays or blank
screens into meaningful waveforms.
When the ll starts to acquire a waveform, it collects enough data so that it can
draw the waveform to the left of the trigger point. The ll continues to acquire
data while waiting for the trigger condition to occur. After it detects a trigger, the ll
 continues to acquire enough data so that it can draw the waveform to the right of
the trigger point.