User's Manual

Assemble the Wall-Bracket by using 2 Places slots on the bottom of the
phone, and then hook up holes of the Wall-Bracket to the screw head.
2.6 How to install battery
1.Open battery cover on the bottom side of the WLL.
2.Connect the battery DC power connector/cable to WLL.
3.Inset the battery pack in the right position between the hold bars.
4.Close the battery cover.
2.7 Installation For the Data Service
As shown below, connect a RS-232 data cable to the Serial Port
of the terminal and COM1 (or COM2) of PC. RS-232 data cable
is available from the service provider.