User's Manual

4.3 Connecting tone
4.4 Ear-piece Voice volume
A discrete tone is generated when a call is connected successfully.
1.Pick up the handset.
2.Press <*( ) >, <*( ) > and <3>.
3.Press <*( ) > to set connection tone.
Press <#( ) > to release connection tone.
You can control the Ear-piece volume on your phone.
1.Pick up the handset (Idle status).
2.Press <*( ) >, <*( ) > and <4>.
3.Press <*( ) > or <#( ) > for up or down (4 Step).
4.Press <0> for save.
If your phone connected to the WLL is caller ID enabled, you can set the WLL
to display the caller number or name on the phone.
The default setting of caller ID is DTMF type.
1.Pick up the handset.
2.Press <*( )>, <*( ) > and <5>.
3.Press <*( )> for DTMF type phone or Press <#( ) > for Bellcore type phone.
4.Press <0> to release caller ID setting.
4.5 CID mode
Caller ID is a feature, which notifies you who is calling by displaying the
caller's number on the telephone's LCD when an incoming call comes through.
This feature is available only with a telephone that has an LCD display on it.
NOTE :
Contact your service provider to activate or deactivate Caller ID.
4.2.3 Release Alarm Setting
1.Pick up the handset.
2.Press <*( )>, <*( )>, <2> and <#( )>.
NOTE : When you will hear the alarm sound, pick up the handset to turn off alarm.