User's Manual

CDMA WLL User’s Guide  HTT-800A

-102-
10. Troubleshooting Guide
Problems What To Do
Troubleshoot the
conventional wired
telephone
In the event you are unable to dial or
receive telephone calls, first be sure
that the connection wire is properly
connected to the RJ-11 phone port
on the terminal and to the RJ-11 port
of the telephone. If unsure whether
or not the telephone is operational,
connect a telephone, which is known
to be operational to the terminal. If
service is available with the
operational telephone, replace or
repair your telephone equipment. If
service is still not available, then
follow instructions under
“Troubleshoot the Fixed Wireless
Terminal”
When you hear no
sound after hook-off?
Check
If the power LED or battery LED of
the terminal is on.
If off, check if the SMPS power plug
is properly connected to the terminal.
Check the RJ-11 jack of the terminal
connected to the telephone
Troubleshoot the
Fixed Wireless
Terminal
Check for the appropriate power
indication on the LED. If no power,
check the AC/DC adapter (or
External Power Supply) connection
between the electrical outlet and the
terminal. Check for the appropriate
Received Signal Strength Indication
(RSSI), Power, and Message
Indication through the designated
LED, respectively.