User's Manual

CDMA WLL User’s Guide  HTT-800A

-20-
3. DATA Port: The DATA Port used to connect the
terminal to the PC for maintenance/repair, and
data communication.
4. Battery Switch: If you use Battery, you should
switch on the battery Switch.
The Battery pack is charged when battery
switch is on.
5. UIM Connector: Refer to 4.11 R-UIM.
Name LED
Color
Activity Meaning
GREEN On
AC/DC adapter is giving 12V DC
without a battery.
ORANGE On
Battery is fully charged. (AC/DC
adapter is connected.)
ORANGE Flashing
Battery is charging. (AC/DC
adapter is connected.)
RED On
Battery Power is applied without
AC/DC adapter.
RED Flashing
Low Battery Warning. (AC/DC
adapter is not connected.)
POWER
- Off
No AC Power/No power is being
supplied by battery.
GREEN On Good Signal
RED On Poor Signal
RED Flashing Poor Signal Warning
SIGNAL
- Off No service area.
GREEN On
Voice Message is received.
Data Call is connected.
GREEN Flashing
Data service or G3 FAX is
incoming / outgoing.
MODE
RED Flashing Voice call is incoming.