User's Manual

CDMA WLL User’s Guide  HTT-800A

-28-
3.2 Making a call
1. First check to see that your FWT Phone is
turned on.
2. Pick up the handset. You will hear a dial tone.
3. Using the number keypad, dial the desired
telephone number (Max 32 digits).
Note: When you finish entering phone number,
the call will be connected automatically after 5
seconds. Please Refer to 4.9 Auto dial time.
4. When the other person answers, begin your
conversation.
5. To end the call, replace the handset.
Note: Dial Tone
Dial tone will be generated if you lift your handset until
your press any key. This Model will not generate any dial
tone in NO Service status.
3.3 Receiving a call
1. The terminal signals telephone(s) to ring when
an incoming call is detected.
2. Pick up telephone handset and begin talking
through handset.