User's Manual

CDMA WLL User’s Guide  HTT-800A

-32-
4.4 Earpiece Volume
You can adjust the Earpiece volume to levels 1-4. The
Number 4 is highest volume.
1. Pick up the handset (Standby mode).
2. Press <*>, <*> and <0>, <4>.
3. Press to select one among from <1> to <4>.
4. Press <*> for save.
4.5 CID / CLIP Mode
If your phone connected to the FWT is caller ID enabled,
you can set the FWT to display the caller number on the
phone. The default setting of caller ID is DTMF type.
1. Pick up the handset.
2. Press <*>, <*> and <0>, <5>.
3. Press <1> for DTMF type phone or <2> for Bell
core type phone.
Press <#> to release caller ID setting.
4. Press <*> for save.
Note: Caller ID is a feature, which notifies you who is
calling by displaying the caller’s number on the
telephone’s LCD when an incoming call comes through.
This feature is available only with a telephone that has
an LCD display on it. Contact your service provider to