User's Manual

CDMA WLL User’s Guide  HTT-800A

-34-
out. Long Call restrict feature is disabled as a factory
setting.
1. Pick up the handset.
2. Press <*>, <*> and <1>, <2>.
3. Press 4 digits Lock Code Number. (Default
Number is 0000 (four times zero)).
Note: If the code is correct, it sounds
confirmation beep. If not, it returns to the
standby mode with error beep.
4. Press <*> to set long call restrict or Press <#>
to release long call restrict.
Note: If someone tries to make a call when
long call restriction is set, it sounds restriction
beep.
4.6.3 International Call Restrict
If you try to make an international call while international
call restrict is enabled, then you will hear warning tone
after dial time-out. International Call restrict feature is
disabled as a factory setting.
1. Pick up the handset.
2. Press <*>, <*> and <1>, <3>.
3. Press 4 digits Lock Code Number. (Default
Number is 0000 (four times zero)).
Note: If the code is correct, it sounds