User's Manual

CDMA WLL User’s Guide  HTT-800A

-38-
pressed until press <*>.
4. Press <*>.
5. Wait until you hear confirmation beep.
4.10 Data Service
Using USB or RS-232 Cable, you can connect this
model to PC for Internet, PC Communication and/or G3
Fax communication, if your service provider provides
Wireless Data Communication Service.
Refer Section 7 for G3 Fax
Refer Section 8 for Data Service
4.11 R-UIM (Optional)
The R-UIM (Removable User Identity Module)
Specification is TIA/EIA/IS-820 and R-UIM Addendum1
is TIA/EIA/IS-820-1.
1. Open UIM cover on the bottom side of the FWT.
2. Connect the UIM Card connector to FWT.
3. Close the UIM cover.
Note: Turn off the phone whenever you insert or remove
UIM card.
R-UIM feature is network supported.