User's Manual

SUN TELECOM INTL. PROPRIETARY
3



1. What is The EXPEDITOR?
EXPEDITOR is a system designed to transfer data within a limited area such as a restaurant.
This unique system increases the servers ability to service customers. This is done through increasing the
efficiency of the server.
22. EXPEDITOR Components.
1. Main Unit – Unit Body -1 ea, Antenna-2 ea, Bracket-4 ea, Screw (small) for Bracket-8 ea (3*8mm)
Screw (Big) for fix-4 ea (4*20mm), Foot (rubber) for Housing-4 ea (20*20*3mm)
2. Chef Unit – Unit Body -1 ea, Antenna –1 ea, Bracket-4 ea, Screw (small) for Bracket-8 ea (3*8mm)
Screw (Big) for fix-4 ea (4*20mm), Foot (rubber) for Housing-4 ea (20*20*3mm)
3. Table Unit- Unit Body -50 ea, Menu Boards-50 ea, AAA batteries-150 ea.
4. Server Unit - Server Units-5 ea, AAA batteries -5 ea, Server band-5 ea, Holder-5 ea, Chain-1 ea,
Server Unit Manual – 1 ea.
5. EXPEDITOR Operations Manual - 1 ae.
3.3.How to Install Expeditor.
1. Main Unit
1) Install brackets to Main Unit using the small screws. The brackets are installed to the sides
of the Main Unit. After installing mounting brackets to Main Unit, the unit can be mounted
to the wall.
2) Connect the 9V/1.5A power transformer to the Main Unit using the barrel connector end of
the power supply. Connect the other end of the power transformer to a standard 110v wall
outlet.
2. Chef Unit
1) Install brackets to Main Unit using the small screws. The brackets are installed to the sides of
the Main Unit. After installing mounting brackets to Main Unit, the unit can be mounted to the
wall.
2) Connect the 9V/300-500mA power transformer to the Main Unit using the barrel connector end of
the power supply. Connect the other end of the power transformer to a standard 110v wall outlet
3. Table Unit
1) Install 3 x AAA batteries in accordance with instructions on the bottom of the unit body.
Install Menu board to the top of the Table Unit body. Turn power switch to ON located on