User's Manual

SUN TELECOM INTL. PROPRIETARY
6
<Table Unit Button Function>
No. 1 : Ready to Order
No. 2 : Need more Drinks
No. 3 : Need more Bread
No. 4 : Need Silverware/ Napkin
No. 5 : Need Assistance
No. 6 : Check please
3) Once a data selection is chosen by the customer, the Green LED lights up the show that Data is
being sent. The Table Unit sends the data and the Server Unit address information to the Main
Unit. The Main Unit will send the information to the Server Unit assigned to this specific table.
4) If the Delay Feature is activated, this will be indicated by a RED LED being lit for the duration
to the delay time. No other selections may be selected during this time.
4. Server Unit
1) The Server Unit receives requests sent to it by the Table Units assigned to it and the
Chef/Management Units. These units send the data through the Main Unit.
2) More information is available in the Server Unit Operations Manual
6. 6. Troubleshooting
1. Main Unit
1) No Power.
- Insure that the Power Supply Unit is of proper type. (9V/1.5A).
- Insure that the power supply is plugged into the unit a the wall.
- insure that the Power Switch is in the ON position.
2. Chef Unit
1) No Power.
- Insure that the Power Supply Unit is of proper type. (9V/300-500mA ).
- Insure that the power supply is plugged into the unit a the wall.
- insure that the Power Switch is in the ON position.
3. Table Unit
1. No Power to unit.
- Insure batteries are installed according to the instructions on bottom of unit
- Insure that the batteries are in working order.
- Insure that power switch is in the ON position
2. No Transmission from unit.
- Insure power switch on bottom of unit is in the ON position.
- Insure that the batteries are installed properly and in working order.
- Insure that Delay Function is in the OFF position
4. Server Unit