User's Manual

Facial Recognition System
44
Face Recognizing
 When user stands in front of a terminal, it will activate and detect user’s
face automatically.
 The terminal will activate to face detecting mode while a user stand in
front of it.
 Message <Verifying…> and <Eyes in Mirror> will show on the
screen.
 Indicator is flashing, if the terminal locates user’s eyes. Then the system
activates recognition status.
 When recognizing is finished and successful, the system will list user’s
registered information: ID, name, enter time, etc.
If Work Status function is enabled, press to activate Work
Status list before recognize.
 If the terminal could not recognize a user in first 5 seconds, it will show
“Adjust Your Position” message on the screen; if it still could not
recognize the user in second 3 seconds, the terminal will show rejecting
message.
 In standby status, press to enter ID & Face (ID & Pin) recognition
method directly.
Enroll Face Templates
 Usage:
 30cm to 80cm (between face and mirror)
 Normal face expression