-Digimax210SE/«•¡ˆ 00.10.24 8:31 AM D‰¿Ã¡ˆ1 SAMSUNG TECHWIN CO.,LTD. OPTO ELECTRONICS DIVISION PLANT 1, SAMSUNG TECHWIN CO.,LTD. 42, SUNGJU-DONG, CHANGWON-CITY, KYUNGNAM, KOREA C.P.O BOX 9762 TEL : (82) 55-260-5941, 5945, 5951 FAX : (82) 55-260-5955~6 SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVES, SECAUCUS, NJ07094 TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST.
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ2 A SPECIAL FEATURE CONTENS Thank you for buying a Samsung Camera. ßô Getting to know your camera°¶ 4°¶ ßô Digital zoom°¶ °¶ °¶ °¶ This is a digital camera possessing the following features: ßô Note for safety5°¶ °¶ °¶ °¶ ßô Setting up shooting function using a ¢ ÚA high resolution image of 2.1 megapixel ¢ Ú3x optical zoom lens and 2x digital zoom lens ¢ ÚMoving image function ¢ ÚPC interface function ¢ Ú1.
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ4 BEFORE YOU START USING YOUR SAMSUNG CAMERA °‹ Prior to using this camera, please read the instruction manual thoroughly. °‹ Keep the manual in a safe and secure place. NOTE IN SAFETY Warning °·Do not attempt to modify this camera in any way. This may cause a fire or electric shock or severe damage to the camera.
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ6 NOTE IN SAFETY Warning CONTENTS Contents °· Please check you have the correct contents before using this product. °·Do not leave this camera in places subject to extremely high temperatures, such as in a sealed vehicle or in direct sunlight. Exposure to high temperatures may adversely affect the camera case and internal components and cause a fire.
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ8 PART NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. Front/Rear PART NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. Side/bottom Self timer lamp Flash Shutter button Mode dial Select button Camera Status LCD Viewfinder Scroll button Flash fading control sensor Digital connection terminal (RS232C output terminal) USB connection terminal Video connection terminal (Video output terminal) Lens External interface cover Strap Attachment point. Compact Flash card cover.
-Digimax210SE(02~47) 00.10.24 8:31 AM D‰¿Ã¡ˆ10 PART NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. Viewfinder PART NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. Photographing information indicator Close range picture (area mark) Optimum picture area within 0.8~1.5m Flash mode indicator : Auto flash : Auto flash and Red-eye reduction Picture area frame Optimum picture area over 1.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ12 PART NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. PART NAMES FOR THE EXTERIOR OF THE DIGIMAX 210. LCD monitor symbol °·Monitor symbol for (Macro /Normal ) °·Play mode symbol °[STATUS Confirmation°\ Digital zoom Press the STATUS button on shot mode. Digital zoom °[ Display of the beginning frame°\ Picturing available remaining number Formatting Capture ¶UMoving image ( ) Order of storing files on the memory card.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ14 PREPARATION Connecting to Power There are two ways in which to provide the camera with power. One is using batteries (AA Alkaline) alternativley use an AC Adaptor (DC 6V / 1.5A) PREPARATION Reference °§After the low battery symbol appears, the camera will continue to work for approx 10 minutes. °§This camera will automatically switch off when not in use for a period of time.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ16 PREPARATION °·Battery life ¶UThis camera will generally to provide over 100 images using one set of batteries under normal conditions. PREPARATION Attaching the strap To prevent accidental damage to the camera always use the strap. 1 Reference We recommends a battery like below.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ18 PREPARATION PREPARATION Inserting the compact flash memory card Instructions on how to use a new memory card. cover towards the arrow to open the card 1 Push cover. °·Before using, the card must be initialised. 2 Inset the card. °ÿ For more details, please refer to the user manual,page 60. °§Intialising prepares the card for recording data. close, push towards the arrow until you hear a 3 To click.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ20 PREPARATION Note Important information in using memorycard. °§If you switch off this camera whilst it is reading initialising or playing, the information on the memory card may be corrupted. PREPARATION Selecting the date and time °·You can record the date and time with the image data in the memorycard when you take a picture. Please select the date and time when you use the camera for the first time.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ22 CAMERA WORKING MODE Camera working mode Now let’s take a picture. °·You can select the appropriate working mode by using the mode dial located at the top of the camera. This digital camera has 4 working modes these are listed below. ¢ M Ú acro photography( ) This mode is used for close range photography between 20cm ~ 80cm. The flash( )is set up to operate automatically but you can set the flash mode to your own preference.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ24 TAKING PHOTOS Reference Note ¢ IÚf there is insufficient memory available the camera status LCD ¢ U Únder certain conditions the auto focus system may not perform as will flash as zero. °§Reducing the file size may allow some more shots to be taken ( ). °§If you press halfway the shutter button for the shot when LCD panel is on, the following message is displayed. ¢—If you want to use the LCD monitor, simply press the LCD button.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ26 SETTING UP THE SHOOTING FUNCTION Setting up the shooting function by using the photographing information indicator.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ28 SETTING UP THE SHOOTING FUNCTION to cancel the setup mode, press the scroll button until it changes 4 Ifintoyouthewant normal indication condition. Also it can be cancelled in the situations SETTING UP THE SHOOTING FUNCTION Shooting Function details using photographing information indicator bellow. Selecting the Flash mode Reference ¢ C Úancel of photograph information indicator set mode Set mode is cancelled automatically when following these instructions.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ30 SETTING UP THE SHOOTING FUNCTION SETTING UP THE SHOOTING FUNCTION Selecting image quality mode Selecting the Selftimer mode. °§Using the SELECT button in the image quality mode, allows three types of image quality to be selected.(The selected image quality will flash). °§This function is used when the photographer also wants to be in the picture. °[Highest Image quality°\ °[ High Image quality°\ °[ Standard Image quality°\ °§The capacity of memory is de
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ32 SETTING UP THE SHOOTING FUNCTION SETTING UP THE SHOOTING FUNCTION Other indicating items of photographing information indicator Indicator for the number of the remaining shot, condition of the card and other information. Macro picture indicator °§According to the condition of the camera and memorycard, it is shown on shot information indicator as below. °§If you select macro photography mode, a symbol( photograph information indicator.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ34 SETTING UP THE SHOOTING FUNCTION Reference ¢ D Ú igital zoom. °§Because this camera can support 2x digital zoom, if you use it with 3x optical zoom, it is possible to take picture of 6x zoom almost. SETTING UP THE SHOOTING FUNCTION Setting up the picturing function by using the LCD monitor °·If you press the MENU button on the state of power on the entrance screen the menu status will be displayed on the LCD monitor.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ36 SETTING UP THE SHOOTING FUNCTION menu set mode is divided into 4 function blocks. 2 The Select the function block by using the left directional button. 3 ¢ PÚress the button ¢ PÚress the button ¢ PÚress the button ¢ PÚress the button ¢ PÚress the button ¢ PÚress the button SETTING UP THE SHOOTING FUNCTION The following options are available on the LCD monitor by pressing the menu button.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ38 SETTING UP THE SHOOTING FUNCTION PROPERTY 1 QLTY °· : Select a compression rate FILE °· : SIZE °· : Select a format Select a resolution 2 C°·TAYPPTEURE °§One nomal shot is taken. °§Continous shooting : Allows you to continuously shoot individual pictures of amoving object. °§Interval shooting : This mode takes pictures at set timed intervals. °§Moving image shooting : it is saves as the moving images.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ40 SETTING UP THE SHOOTING FUNCTION PROPERTY SETTING UP THE SHOOTING FUNCTION CAPTURE Change the set status on the PROPERTY menu screen by using the 4 directional buttons. °·By selecting QLTY you can change the compression rate of the picture. Image quality is good in this order. Change the set status on the CAPTURE menu screen by using the 4 directional buttons. °· There are 4 kinds of CAPTURE modes.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ42 SETTING UP THE SHOOTING FUNCTION ¢ ÚContinuous shooting °§You can take a number of pictures of moving objects. °§When the continuous shot is completed, it is automatically set up as one shot take mode. Continuous shooting munber is marked. ¶_If the Enter button is pressed after selecting continuous shooting, the LCD screen will display the “Burst Set” menu, where the amount of shots requires can be selected by using the directional buttons.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ44 SETTING UP THE SHOOTING FUNCTION ¢ ÚMoving image °§You can shoot a moving image up to a maximum of 30 seconds. °§When the setup is completed, it is automatically set up as one shot take mode. SETTING UP THE SHOOTING FUNCTION °· FLASH °§There are 4 flash modes. °§Select and use the proper flash mode according to the shooting conditions Auto flash Go into the “Capture” menu and select the moving image icon under “Type”.
-Digimax210SE(02~47) 00.10.24 8:32 AM D‰¿Ã¡ˆ46 SETTING UP THE SHOOTING FUNCTION ADVANCE Change the set status by using the 4 directional buttons on the ADVANCE menu screen. SETTING UP THE SHOOTING FUNCTION °· E.V This camera will control the exposure value automatically although you can also adjust it manually. °§Select the exposure value by using the left and right directional buttons after moving the cursor bar onto EV. ¶_If you increase the exposure you will obtain a bright er image.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ48 SETTING UP THE SHOOTING FUNCTION SYSTEM Change the set status in the SYSTEM menu screen by using the 4 direction moving buttons. SETTING UP THE SHOOTING FUNCTION °§Warning sound of a card There are circumstances when no warning sound will be heard: ¶_When you take out a memory card. ¶_When there is no available space for images on the memory card.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ50 SETTING UP THE SHOOTING FUNCTION DATE/TIME °· °§The date and time can be selected. This will allow you to put the date and time on your photos. ¶_If you press the ENTER button after selecting the date and time, the date and time will be displayed on the LCD monitor.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ52 PLAY MODE PLAY MODE Starting the play mode Setting play mode Turning the mode dial( )to play mode will allow you to play any pictures or moving images stored on the memory card. displayed. ®A You will now see the menu screen appear on the LCD monitor. °· Play mode( ) When play mode is selected the LCD on the top panel will show the battery status. No other icons will appear on the LCD.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ54 PLAY MODE PLAY MODE THUMBNAIL Play function list °·The LCD display is as follows: 1 THUMBNAIL THUMBNAIL Function items SLIDE SHOW ¢ ’ 03 ¢ Úsec PROTECT ¢ ’ UNLOCK ¢ Ú °§The thumbnail view allows you to view up to 9 images at a time. °§This function allows you to view 9 images at the same time. Press the ENTER button after selecting the THUMBNAIL option. 9 thumbnail screens will be marked out on the LCD monitor.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ56 PLAY MODE PLAY MODE SLIDE SHOW PROTECT (Lock/Unlock) °§You can view each image at a set interval using the slide show function. °§You can lock the important images which are already taken or cancel the locked images. push ENTER button after selecting a bar cursor into [SLIDE SHOW] 1 inIf you a manual starting screen status, SLIDE SHOW is executed. °ÿ SLIDE SHOW °§Highlight slide show and press ENTER.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ58 PLAY MODE PLAY MODE ERASE ALL Note °§All image data which is saved in compact flash memory card is to be erased. you push ENTER button after moving a bar cursor into ERASE ALL in a 1 Ifmanual starting screen status, the messages like below appears on a liquid °§Erasing images will clear the memory of all information (except locked images). You must transfer any image files that you want to save to another medium before erasing takes place. monitor.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ60 PLAY MODE PLAY MODE FORMAT Note °§This function is for formatting a compact flash memory card. Formatting the card allows data to be stored on it. moving the bar cursor to FORMAT, press ENTER then the following 1 After messages will appear on the LCD monitor. °§[ERASE ALL] function is for erasing only image files of a memory card that a camera can percieve but [FORMATTING] function is for deleting all data of a memory card.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ62 PLAY MODE DPOF (Direct Print Ordering Format) °§You can print out the saved images in compact memorycard as much as you set up with the digital photo printer which supports DPOF. put the LCD/ DPOF button under the state of the first monitor display 1 Ifin you the play mode, the below messages appear on a liquid monitor. CONNECTION TO AN EXTERNAL MONITOR Connection to an external monitor.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ64 PC CONNECTION MODE Starting PC connection mode. °§If you select mode dial position with the power on, the camera is transferred to the “connecting to the computer mode” which can download the shot images saved in memorycard. PC CONNECTION MODE Setting the PC connection mode. Starting a menual set mode 1 Press the MENU button after switching the camera on. °Ê The initial menu screen will appear on the LCD monitor.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ66 PC CONNECTION MODE NOTE IN USING Caution! Function of PC connection mode your images. 1 Downloading °§Once you have downloaded your images to the hard disk, you can then edit and print them. (1) Connect your camera to a computer by using the USB or RS-232C cable. (2) Download the image editing software provided with the camera. °ÊRefer to page 75-100 for software installation instructions.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ68 NOTE IN USING BEFORE CONTACTING SERVICE CENTER ¢ ÚMaintenance °§To clear the Lens or LCD Status panel, a soft brush should be used. If this does not work lens-cleaning paper with lens cleaning fluid can be used. °§Clean the camera with a soft cloth or a mild detergent. It may cause the deterioration, deformation or falling off the paint. °§The LCD moniter can be damaged very easily, please ensure that it does not come into contact with any sharp impact.
-Digimax210SE(48~71) 00.10.24 8:34 AM D‰¿Ã¡ˆ70 BEFORE CONTACTING SERVICE CENTER Symptom Cause Steps SPECIFICATION Type Image sensor Camera fails to work by any button or switch ¶UCamera not functioning prorerly The card error indicator is on with the memorycard inserted. ¶UThere is a difference of the There is something wrong with the color of captured image. The screen is too bright. The screen is not very clear. ¶URemove the batteries and insert them again. ¶UStart the memorycard and use it.
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ72 SOFTWARE MENUAL BEFORE YOU SET UP THE SOFTWARE Please ensure that you read the instruction manual carefully before using the camera. ¢ ÚSoftware Notes Introducing the software ¢ ÚDirect Download Program °§The attached pieces of software are Twain Driver for the Digmax 210SE, Direct Download Program and an editing software.
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ74 BEFORE YOU SET UP THE SOFTWARE System Requirements (2000 September) ¢ ÚFor windows computer : Personal computer with processor better than MMX Pentium 200 MHz HOW TO SET UP THE SOFTWARE How to set up the software °· When you put the Drive CD-ROM provided with this camera into the CD-ROM drive, the following frame is automatically run. Operating System : Windows 98, 98SE, 2000 Memory : Minimum 32MB RAM .
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ76 SET UP THE TWAIN DRIVER(FOR WINDOWS) Installation of the USB Twain Driver (Windows 98) SET UP THE TWAIN DRIVER(FOR WINDOWS) on the [next] button when 4 Click the next screen is shown After connecting the computer 1 and the camera via the USB cable the message [new hardware additional wizard] will be displayed on your screen. Click [next] to proceed. Move the files you need 5 from the [set up Driver] CD provided.
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ78 SET UP THE TWAIN DRIVER(FOR WINDOWS) Installation of the USB Twain Driver (Windows 2000) SET UP THE TWAIN DRIVER(FOR WINDOWS) on the° N ’ ext°button p when 4 Click this screen is shown. After connecting the computer 1 and the camera via the USB cable, the message ° ’Found New Hardware Wizard°will p be displayed on your screen. Click ° N ’ ext° bputton. Click on the ° ’Y e s° bpu t t o n 5 when this screen is shown.
-Digimax210SE(72~) 00.10.24 8:34 AM D‰¿Ã¡ˆ80 SET UP THE TWAIN DRIVER(FOR WINDOWS) Note Do as follows when the following frame is displayed while you are setting up USB TWAIN Driver. SET UP THE TWAIN DRIVER(FOR WINDOWS) TWAIN Driver °inpstallation 7 °was’USBfinished. After clicking° F ’ inish° p button, restart the computer. the provided Driver CD 1 inInsert CD-ROM drive and Click ° O ’ K°bputton.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ82 SET UP THE DRIVER(FOR WINDOWS) Set up RS-232C Twain Driver SET UP THE DRIVER(FOR WINDOWS) Move the files you need from the Driver 4 CD-ROM provided. you click Serial-TWAIN Driver on the frame displayed after you put the 1 When provided [setup the Driver] CD into the CD-ROM Driver, the following frame is displayed. is displayed 2 Ifclickthisthescreen “NEXT” button [ Finish ] button. 5 Click Then RS-232C Twain Driver installation is finished.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ84 SET UP THE DIRECT DOWNLOAD PROGRAM Set up the Direct Download-USB Program for windows SET UP THE DIRECT DOWNLOAD PROGRAM The Direct download set up is completed. 5 Click the [Finish] button. When you click USB -TWAIN Driver on the 1 frame displayed after you put the provided [setup the Driver] CD into the CD-ROM Driver, the following frame is displayed.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ86 SET UP THE EDITING SOFTWARE Installation of Adobe Photo Deluxe 3.0 editing software CONNECT THE CAMERA Connecting USB connecting jack for Windows °·To download the images from Digimax 210SE to PC and edit them, both Windows 98(or 2000) and USB connecting jack are required. the USB cable to the USB port on the 1 Connect computer. the other end of the USB cable to the 2 Connect USB port of the camera. 3 Set the mode dial. 4 Switch the camera on.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ88 HOW TO USE DIRECT DOWNLOAD PROGRAM HOW TO USE DIRECT DOWNLOAD PROGRAM How to start Direct Download program for Windows How to start Direct Download program for Windows To start Direct Download program: To start Direct Download program: ¢ ÚWhen USB cable is connected The following screen is displayed when you click [START MENU -> PROGRAM -> DirectDown USB-> Direct Down USB] in order or click [Direct Down USB] icon on the beginning frame.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ90 HOW TO USE DIRECT DOWNLOAD PROGRAM Âü °í If the moving image you downloaded is not played, set up and use the video compression codec. 1 Put the provided Driver CD into CD-ROM Drive. the windows search and then click JPEG_Decoder folder in the 2 Play CD-ROM Drive folder. The frame below is displayed when you select Jpegcode.inf in 3 JPEG_Decoder folder and then press the right button on your mouse.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ92 HOW TO USE TWAIN DRIVER Select [Samsung Digimax210SE Serial] if your computer has RS-232C connecting jack, and select [Samsung Digimax210SE USB’ if your computer has USB connecting jack. Then, you are done with selecting TWAIN Source. After selecting TWAIN Source, select [TWAIN Acquire*] and the following window will appear. Here is the function of each icon. HOW TO USE EDITING SOFTWARE How to open Adobe Photo Deluxe 3.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ94 HOW TO USE EDITING SOFTWARE How to use Adobe Photo Deluxe 3.0 HOW TO USE EDITING SOFTWARE £ π Storing and Sending Images You can store or alter the image format in PDF/ GIF/ JPEG. Once ¢ ÚOpening and editing pictures you have downloaded your images you can also save them as a background image for Windows.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ96 HOW TO USE EDITING SOFTWARE £ π Label Several kinds of labels and gift tags can be made using Adobe Photo Deluxe 3.0. £ π Frames The photo frames function can be used to frame photos or as a frame in the T-shirt transfer. £ π PhotoParade You can make and execute PotoParade. And you can also obtain a detail information about Photoparade.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ98 HOW TO USE EDITING SOFTWARE Retrieving Images from the Digimax 210SE Select [opening and editing pictures], 1 then click download pictures from the HOW TO USE EDITING SOFTWARE number of images stored in the 4 The camera will be displayed on the monitor. camera. the image that you want and click 5 onSelect it . The camera will then download that image. 2 If the following screen is displayed click (1.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ100 HOW TO USE EDITING SOFTWARE - Enlargement rate Select the arrow and select the enlargement rate. - Waste Box HOW TO USE EDITING SOFTWARE Storing images in Adobe Photo Deluxe 3.0 If you wish to download pictures and store them 1 onto a hard disk etc. the click on [file: store] A selected portion of the picture is deleted - Object Order You will be able to move objects to the front or back after selecting the object order menu.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ102 HOW TO REMOVE THE DRIVER AND PROGRAM HOW TO REMOVE THE DRIVER AND PROGRAM ¢ ÚRefer to the below if you want to eliminate the Driver and Direct Download program which are already set up. Reference Do as follows in case Inf folder inside Windows folder is not displayed. How to remove the USB TWAIN Driver Select [seeing->folder option] on 1 the file menu like the next picture. Select [tools->folder option] in case of Windows 2000.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ104 HOW TO REMOVE THE DRIVER AND PROGRAM How to remove the Serial TWAIN Driver When you select [program addition/elimination] icon 1 below is displayed. HOW TO REMOVE THE DRIVER AND PROGRAM How to remove the Direct Download_USB program.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ106 HOW TO REMOVE THE DRIVER AND PROGRAM How to remove the Direct Download_Serial program. When you select [program addition/elimination] icon 1 below is displayed. on the control board, the frame HOW TO SOLVE THE PROBLEMS ¢ ÚExpected problems You will see the frame below in the image-editing program, [Adobe PhotoDeluxe] when TWAIN Driver doesn’t operate normally. 1.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ108 HOW TO SOLVE THE PROBLEMS ¢ ÚCheck points & Solutions SET UP THE TWAIN DRIVER (FOR MAC) TWAIN Driver Installation for Macintosh 1. When TWAIN Driver is set up improperly These problems may occur when TWAIN Driver is set up improperly or TWAIN Driver has been already set up for another camera.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ110 SET UP THE TWAIN DRIVER (FOR MAC) USB TWAIN Driver Installation for Macintosh install USB TWAIN Driver, TWAIN Protocol is required. Refer to the page in (109 ) 1 forTo information regarding TWAIN Protocol installation. see the frame below when you open [MAC USB TWAIN ] 2 You folder from Driver CD-ROM.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ112 CONNECT THE CAMERA Connecting Macintosh USB connecting point °·Digimax 210SE USB TWAIN Driver for MAC, was designed for USB port only. Therefore, it requires built-in USB port with built-in Mac hard disk or keyboard. HOW TO USE DIRECT DOWNLOAD PROGRAM How to run the Direct Download for the Macintosh users Plug in the exclusive cable (USB cable or Serial Cable) to the USB port of the 1 Macintosh or to the terminal of the camera.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ114 HOW TO USE DIRECT DOWNLOAD PROGRAM How to use Direct Download for the Macintosh users You can download the files selected directly from the Image List and also select and download the files classified from the Image Group with Direct Download program. The functions of the each Direct Download program is like following: Section Image List Image Group Select Folder Download 114 Function This is the list of the files saved in the memory card.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ116 HOW TO USE TWAIN DRIVER Select [Samsung Digimax210SE Serial ] if your computer Communications connecting jack for Macintosh, or select [Samsung Digimax210SE USB ] if your computer has USB connecting jack. Then, the selection of TWAIN Source for this camera is completed. HOW TO SOLVE THE PROBLEMS Solutions for Macintosh-based Programs Type 1. The memory is not enough or the memory is abnormal. ¢— End the program you are using and run the program again.
-Digimax210SE(72~) 00.10.24 8:35 AM D‰¿Ã¡ˆ118 HOW TO SOLVE THE PROBLEMS Type 3. This is the error that happens when you cannot take the Thumbnail Image though the initiating setup of USB or communication port is already done. HOW TO SOLVE THE PROBLEMS Type 5. This is the error that happens when you erase the image though all the beginning set up is done. ¢— Check whether there is the memory card in Samsung Digimax 210SE Camera or check if the camera mode is on the PC mode.