User's Manual

Connecting to a Power Source

Battery status

Battery indicator

The batteries are fully

charged.

Prepare new batteries.

There is no battery capacity.

Replace with new batteries.

There are 3 indicators for battery condition that are displayed on the LCD monitor.

3. To close the battery chamber cover, push it until it clicks.

2. Insert the batteries taking note of the polarity

(+ / -).

1. Open the battery chamber cover by pushing in the direction of the

arrow.

: If the camera does not turn on after you have inserted batteries,

please check whether the batteries are inserted with the correct

polarity(+ and-).

Using the batteries

Inserting the AA type battery Inserting the CR-V3 type battery

The Digimax Battery Pack is a rechargeable external

Li-ion battery for use with most digital cameras.

These optional battery packs provide long lasting

power and their operating performances are much

improved over Ni-MH and Alkaline batteries.

This is due to the mass storage lithium ion cell.

Refer to the illustrations.

Using the Digimax battery pack ( Optional : SBP-3603, 3.3V)