User's Manual

55
Starting the slide show
Protecting images
Configure slide show effects: Unique screen effects can be used for the slide show.
Steps 1 and 2 are the same as for the [INTERVAL] section.
3. Select the [EFFECT] sub menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the Up/Down Button to select the type of effect.
[OFF] : Normal display
[EFFECT 1] : Image is displayed slowly
[EFFECT 2] : Image is displayed slowly from the center
outwards
[EFFECT 3] : Image moves from the top left
[EFFECT 4] : Image moves from the bottom right
5. Press the OK button to confirm the setting.
* Please reset the play interval to start the slide show.
This is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [PROTECT]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SELECT]: Selection window for an image to
protect/release is displayed.
Up/Down/Left/Right: Select an image
Zoom W/T Button: Protect/release the image
Menu Button: The menu screen is changed to the play
mode screen
[ALL PICS]: Protect/release all saved images
Zoom WT Button: Protect/release the images
Menu Button: The menu screen is changed to the play
mode screen
SLIDE
INTERVAL
REPEAT
EFFECT
BACK:
SET:OK
CANCEL
EFFECT1
EFFECT2
PROTECT
SELECT PICS
ALL PICS
EXIT:MENU MOVE:
EXIT:MENU
W
UNLOCK T
EXIT:MENU
W
UNLOCK T