User's Manual

ManualsBrandsHanwha Techwin ManualsCamera & PhotoDigital Camera

Select card

The camera has multi memory slots for an SD Memory Card (Multi Media Card) and Memory

Stick Duo. Select memory card to use when both memory slots are loaded with a memory

card.

Memory card selection

1. In any mode with the exception of Voice Recording mode,

press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [SEL.CARD] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Use the UP and DOWN buttons to select the desired date

imprint type, and then press the OK button.

[SD/MMC] : Selects SD card or Multi Media Card

[MS DUO] : Selects Memory Stick DUO

5. Press the menu button twice and the menu will disappear.

Where only an SD Memory Card or Multi Media Card is loaded, the camera will use the

SD Memory Card or Multimedia Card even if the [MS DUO] option is selected.

Configure the submenu of the [CARD SEL.] menu to use the free space in the auxiliary

memory card when a [CARD FULL !] message is displayed.

INFORMATION

SETUP

Q.VIEW

RESET

CARD SEL

BACK:

SET:OK

SD/MMC

MS DUO

NOR 2272

Connecting an External Device (USB)

You can select an external device to which you want to connect the camera using the USB cable.

Selecting an External Device

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [USB] menu by pressing the UP/ DOWN button

and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

COMPUTER : Select this if you want to connect the camera to your PC. Refer to page 83

for instructions on how to connect the camera to your PC.

PRINTER : Select this if you want to connect the camera to your printer. Refer to page

58 for instructions on how to connect the camera to your printer.