User's Manual

ŝ73Ş
ƈ When an image that have Red-eye effect (When taking a people or animal with a
photographic flash, the eye will be red) plays back, this button will remove the red colour.
1. In the Play mode, select an image that has red-eye effect
by pressing the Left / Right button.
2. Press the Red eye button ( ) and a menu bar for
removing the red-eye effect will display.
3. Press the OK button and the part of red-eyed image will appear more natural looking.
Pressing the E button will cancel the menu.
ſ This function can’t be used with the TIFF file.
ſ If the image size is VGA, the red-eye effect may not be removed.
ſ According to the shooting conditions, this function may not activate. But, this is not the
camera malfunction.
ƈ If you selected [COMPUTER] sub menu of [USB] setup
menu, when you connect the camera to your PictBridge
printer, the [CONNECTING COMPUTER] message will
display and the connection will not be established. In this
case, press the Printer button and the camera is connected to
the printer displaying the [CONNECTING PRINTER]
message. But, the camera may not connect to the printer and
turn off according to the printer manufacturer.
- After the connection, the Easy printing menu will display
on the LCD monitor. To display PictBridge menu, press
the Menu button. For more information about the
PictBridge menu, refer to page 91.
Red eye / Printer button ( )
[An image that has red-eye effect] [An image removed the red-eye effect]
IMAGES
ONE PIC
ALL PICS
SAVE:OK CANCEL:E
MOVE:

