User's Manual

ŝ91Ş
PictBridge
[Using the USB cable with Cradle]
[Using the USB cable with Camera]
ƈ Connecting the Camera to a Printer
ƃ Using the USB cable with Cradle :
Connect the camera and the cradle. Connect the cradle to a printer’s USB port with the
supplied USB cable.
ƃ Using the USB cable with Camera :
Connect the camera to a printer’s USB port with the supplied USB cable.
ſ If you selected [COMPUTER] in Step 4, when you connect the camera to your printer, the
[CONNECTING COMPUTER] message will display and the connection will not be
established. In this case, disconnect the USB cable, and then follow the procedure from Step
2 and onward. Or, press the Printer button and the camera is connected to the printer
displaying the [CONNECTING PRINTER] message. But, the camera may not connect to the
printer and turn off according to the printer manufacturer.
ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. Movie clips and voice files cannot be printed.
ƃ Setting up the camera for connection with the printer
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select [SETUP] menu
tab.
3. Select [USB] menu by pressing the UP/ DOWN button and
press the RIGHT button.
4. Select [PRINTER] menu by pressing the UP/ DOWN button
and press the OK button.
DATE&TIME
IMPRINT
AF LAMP
SOUND
USB
COMPUTER
PRINTER
SETUP
BACK: SET:OK