User's Manual

ŝ92Ş
PictBridge : Picture Selection
ƈ Easy printing
When you connect the camera to printer in the Play back
mode, you can print a picture easily.
- Pressing the shutter button : Currently displayed image will
be printed with the printer’s
default setting.
- Pressing the Left/ Right button : Selects a previous/ next
image.
- Press the Up/ Down button to select the number of prints.
- When [ONE PIC] is selected : Use the Left/ Right button to select another picture and select
the number of prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
ƃ Setting the Number of Copies to Print
- Select [ONE PIC] or [All PICS]. A screen where you can set the number of copies to print
will appear as shown below.
ƈ Select pictures to print
1. Press the Menu button.
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [ONE PIC] is selected : The PictBridge function will
be applied only to the
picture currently displayed.
When [All PICS] is selected : The PictBridge function will be applied to all pictures,
excluding movie clips and voice files.
IMAGES
MOVE:


ONE PIC
ALL PICS
[When [ONE PIC] is selected]
0 PRINTS
PREV
ȜȞ
NEXT
Ɗ
ƌ
SET:OK EXIT:SH1
[When [All PICS] is selected]
0 PRINTS
Ɗ
ƌ
SET:OK EXIT:SH1
PRINT:SHUTTER MENU:OK