User's Manual

ŝ100Ş
Setting up the Date / Time / Date type
ƈYou can change the date and time that will be displayed on the captured images and set up the
date type.
ƃSetting Date / Time & Selecting Date Format
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [DATE&TIME] menu by pressing the
UP/ DOWN button and press the RIGHT button.
4. Use the UP, DOWN, LEFT, and RIGHT buttons to select
the desired submenu value, and then press the OK button.
RIGHT button : Selects the year/ month/ day/ hour/ minute date type.
LEFT button : Moves the cursor to the [DATE&TIME] main menu if the cursor is at the
first item of the date and time setup. In all other cases, the cursor will be
shifted to the left of its current position.
UP and DOWN buttons : Changes the setting value.
5. Press the menu button twice and the menu will disappear.
ƈThere is an option to include DATE/ TIME on still images.
ƃDate Imprinting
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired date
imprint type, and then press the OK button.
[OFF] : The DATE & TIME will not be imprinted on the image file.
[DATE] : Only the DATE will be imprinted on the image file.
[DATE&TIME] : The DATE & TIME will be imprinted on the image file.
5. Press the menu button twice and the menu will disappear.
ſ The Date & Time are imprinted at the bottom right side of the still image.
ſ The date will be imprinted as a [DATE&TIME] setting.
ſ TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the
24 hour clock.
ſ If you select the continuous shooting, the date doesn’t be imprinted.
Imprinting the recording date
ಒൂ:Ȝ໽Ⴤ:OK
FILE
PWR SAVE
LANGUAGE
FORMAT
DATE&TIME
05/08/01 13:00
YYYY/MM/DD
SETUP
Ɗ
ƌ
PWR SAVE
LANGUAGE
FORMAT
DATE&TIME
IMPRINT
OFF
DATE
DATE&TIME
SETUP
BACK: SET:OK
BACK: SET:OK