User's Manual

A
13
Identification of features
Still image mode
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera.(use batteries that are within a year of their date
of manufacture) The batteries are listed below.
Non rechargeable batteries : Duracell CP-1 battery
Rechargeable batteries : Digimax power pack (SLB-1037)
Battery pack : Digimax Battery Pack (SBP-3603)
Lamp
Connecting to a Power Source
You can select from Auto, Manual, or Night mode. In Myset
mode, any changes made to settings other than Self-Timer and
Voice Recording will be maintained even after the camera is
turned off.
Type Operation Lamp Camera Status Lamp LCD Monitor
When turning on the
power
7 color lights blink and then turns off when
the camera is ready to take a picture
Blinks orange once
X
When the camera is in focus (when the
SHUTTER button is pressed halfway)
X
Green lamp lights up
Autofocus mark
lights up green
When the camera is out of focus (when the
SHUTTER button is pressed halfway)
X
Green lamp blinks
Autofocus mark
lights up red
While the flash is charging
X
Red lamp blinks
X
While saving an image
X Green lamp blinks X
While shooting a video
Purple lamp blinks at a 1-second interval X White
During voice recording
Blue lamp blinks at a 1-second interval XX
While the camera is connected to a PC X
Green lamp lights up
X
While transferring data between the camera and a PC X Green lamp blinks X
When shooting an image
Green lamp blinks once for 0.3 second XX
Flash is ready (when the SHUTTER
button is pressed halfway)
X
Red lamp lights up X
While the self-timer is
running
Red lamp blinks for 7 seconds at a 1-second interval/blinks
for 3 seconds at a 0.25 second interval
X
X
When the LCD monitor is
turned off in Still Image mode
Green lamp lights up XX