User's Manual

Connecting to a Power Source

If the charging LED of the SAC-41 does not turn

on or blink after inserting the rechargeable battery,

please check whether the batteries are inserted

correctly.

Important information about battery (SLB-1137) charging

Charging LED

If there is a charging error, please check all the power connections are in place.

All of the chargers (24 pin) have been tested in accordance with TTA (Telecommunication

Technology Association) can be used as AC adapter. We recommend the SAC-41(for both

Charger and AC adapter). Failure to do so may affect your warranty.

You can charge the battery with a USB charging cable(TTA standardized 24 pin cable) by

connecting a PC, but the charging time will be longer than using SAC-41. (About 3 hours)

If you use the USB charging cable (TTA standardized 24 pin cable) as a power cable, please

insert the SLB-1137 rechargeable battery first.

The USB charging cable (TTA standardized 24 pin cable) is optional.

Charging time (When the camera is turned off)

- Using the cradle : About 150MIN

- Using the SAC-41 : About 150MIN

- Using the USB charging cable (TTA standardized 24 pin cable) : About 180MIN or longer.

(The charging time may vary depending on the manufacturers.)

Status Using the cradle Direct to the camera

Being Charged Red LED is on Red LED is on

Charging is complete Green LED is on Green LED is on

Charging error Red LED is off or blinking Red LED is off or blinking

Charging

LED