Daim Ntawv Qhia Tus Neeg Siv

3
Installing the HDD
■
If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the
set before use.
■
If you wish to replace or add an HDD, contact your dealer or our customer service first.
PRN-6410DB4/PRN-6410B4/PRN-3210B4
1
Use the front cover lock key to unlock the cover.
Grab the front cover with both hands and pull it
to the left to remove it.
2
Press the orange button on the hard disk bracket
to the left and pull forward to separate the main
body and the hard disk bracket.
3
Mount a HDD in the HDD bracket and screw it in
using the screws provided.
4
Once the HDD is mounted in the bracket, push
the bracket into the main body and close the front
cover.
■
Fit the front cover into the right notch of the main body, then
press and close until you hear a 'click'.
■
Use the front cover lock key to lock the front cover so that it does
not get separated.
PRN-3210B2/PRN-1610B2
1
Use the lock key on the front cover to unlock
it, and press and pull the left notch of the front
cover to separate it.
2
Press the orange button on the hard disk bracket
to the left and pull forward to separate the main
body and the hard disk bracket.
1
2
3
Mount a HDD in the HDD bracket and screw it in
using the screws provided.
4
Once the HDD is mounted in the bracket, push
the bracket into the main body and close the front
cover.
■
Fit the front cover into the bottom notch on the recorder, and then
press and close until you hear a ‘click’.
■
Use the front cover lock key to lock the front cover so that it does
not get separated.
1
2 2 2
111