User's Manual

《54》
● How to set the custom white balance
White balance settings may vary slightly depending on the shooting environment. You can
select the most appropriate white balance setting for a given shooting environment by setting
up the custom white balance.
1. Select the CUSTOM ( ) menu of the White
Balance.
You can select CUSTOM 1 or CUSTOM 2 white
balance.
2. Place a sheet of white paper in front of the camera so
that the LCD shows only white, and then press the
SHUTTER button.
3. The value you set will be saved.
- The custom white balance value will be applied, starting
with the next picture you take.
- The user configured white balance will remain effective
until it is overwritten.
● How to set the colour temperature
Colour temperature is a simplified way to characterize the
light source. Low colour temperature implies warmer light
(more red) while high colour temperature implies a colder
light (more blue).
1. Select the colour temperature (K) by rotating the Rear
jog dial (JOG2).
2. Select a desired colour temperature (K) by rotating
the Front jog dial (JOG1).
- Approx. 3000 K : Incandescent lamp
- Approx. 4000 K : Out door shooting around the
morning or evening
- Approx. 5000 K : Sunny daylight shooting
- Approx. 6000 K : Electronic photo flash
- Approx. 10000 K : Blue sky
3. Press the WB button to set the setting.
- After pressing the WB button, the colour temperature
icon will display.
- The user configured white balance will remain effective
until it is overwritten.
White paper
JOG2
Measure : SHUTTER
JOG2
JOG1
3000 K 10000 K
6000K
[ Colour temperature icon ]
[ Selecting a colour temperature ]
White balance