User's Manual

《38》
※ You can’t select the WWB icon in the Auto recording mode and movie clip mode.
● How to set the WWB
1. Select the WWB icon by rotating the Rear jog dial
(JOG2)
2. Select a desired white balance value by rotating
the Front jog dial (JOG1).
- The pre-view image will display on the Rear LCD
according as the white balance value is changed.
3. Press the OK or Shutter button to set the white balance
value.
4. Press the shutter button to capture an image.
You can take 3 or 5 shots according to the selected
white balance value.
※
- Bra.WB +
±2
3. Press the OK or Shutter button to set the focus value.
4. Press the shutter button to capture an image.
You can take 3 or 5 shots according to the selected focus value.
※
JOG2
JOG1
Number of shots Selectable focus value
3 ±1, ±2, ±3, ±4, ±5, ±6
5 ±1&±2, ±2&±4, ±3&±6
※ You can’t select the AFB icon in the Auto recording mode and movie clip mode.
Number of shots Selectable white balance value
3 ±1, ±2, ±3, ±4, ±5, ±6
5 ±1&±2, ±2&±4, ±3&±6
Drive button