User's Manual
《39》
● How to set the interval shooting
1. Select the Interval shooting icon [ ] by rotating
the Rear jog dial (JOG2).
2. Press the shutter button to capture an image.
Images are taken at a set interval.
- After taking a picture, the camera power is turned off
automatically.
- After set time, the camera power is turned on
automatically and the second image is taken.
- Images are taken at set number of shots and set interval continuously.
3. After completing the interval shooting, the camera power is turned off automatically.
● How to set the interval shooting
1. Press the Menu button and select the [P] menu tab.
2. Press the Right button and select the [Interval/Time]
menu by pressing the Up/ Down button.
3. Press the Right button and select a desired menu by
pressing the Up/ Down button.
- Interval time : 1 ~60 Min. (1 intervals)
4. Press the OK button to set the setting
5. Select the [Interval/Number] menu.
6. Press the Right button and select a desired menu by
pressing the Up/Down button.
- Number of interval shooting : 2 ~ 99
7. Press the OK button to set the setting.
JOG2
● If you press the power button during the interval shooting (camera power is off),
the interval shooting is cancelled.
● You can’t select the interval shooting in the Auto recording mode and movie clip mode.
● If you select RAW, TIFF file format, you can’t select the interval shooting.
● You can set the number of interval shots over number of shots remaining but the images
are taken to the number of shots remaining.
● We recommend that you use full charged battery or AC adapter when you take the
interval shooting.
INFORMATION
Drive button
채도 조정
샤프니스
음성 메모
인터벌/시간
인터벌/촬영매수
사용자 설정
컬러 스페이스
1분
샤프니스
음성 메모
인터벌/시간
인터벌/촬영매수
사용자 설정
컬러 스페이스
SaveMyset
2장
[ Selecting the interval time ]
[ Selecting the number of interval shooting ]